Current issue : #
1 |
Release date :
17/11/1985 |
Editor :
Taran King
Title : How to Pick Master Locks
_ _ _______
| \/ | / _____/
|_||_|etal/ /hop
_________/ /
/__________/
(314)432-0756
24 Hours A Day, 300/1200 Baud
Presents...
==Phrack Inc.==
Volume One, Issue One, Phile 6 of 8
How to Pick Master Locks
By Gin Fizz & Ninja NYC
Have you ever tried to impress your friends by picking one of those Master
combination locks and failed? Well then read on. The Master lock company has
made this kind of lock with a protection scheme. If you pull the handle of it
hard, the knob won't turn. That was their biggest mistake...... Ok, now on to
it.
1st number. Get out any of the Master locks so you know what's going on.
1: The handle part (the part that springs open when you get the combination),
pull on it, but not enough so that the knob won't move. 2: While pulling on it
turn the knob to the left until it won't move any more. Then add 5 to this
number. Congradulations, you now have the 1st number.
2nd number. (a lot tougher) Ok, spin the dial around a couple of times,
then go to the 1st number you got, then turn it to the right, bypassing the 1st
number once. WHEN you have bypassed. Start pulling the handle and turning it.
It will eventually fall into the groove and lock. While in the groove pull on
it and turn the knob. If it is loose go to the next groove; if it's stiff you
got the second number.
3rd number: After getting the 2nd, spin the dial, then enter the 2 numbers,
then after the 2nd, go to the right and at all the numbers pull on it. The lock
will eventually open if you did it right. If can't do it the first time, be
patient, it takes time.
Have phun...
Gin Fizz/2600 Club!/TPM
Ninja NYC/TPM
THose cheap combination locks we had in HS gym, Just use a hammer or something of the sort. Pops right open. I was thinking of the Key locked master locks, reinforced steel, so a bolt cutter cant cut it. Well u just gotta get good at pickin, use a little graphite locksmith stuff to loosen it up but not gunk it up like oil. then your wrench is a little L shaped tool just fits in the keyhole slot so u can give it some tension to hold the pins to raked up. Then u got a few options. I made a lockpick set from those street cleaner sweeper metals that u find on the road. Or like most ppl u should have a big bag of keys youve saved since childhood. Then bang that hole like it was your GF, fast and hard. If its an old lock it might open that easy. Or if its new u Need something to get past the first pins and push up the last one first and work your way out. like a side ways S or a Zig Zag. But then again a good drill can turn it too. A good attachment for opening door knobs fits on a spin drive and doesnt mess up the key slot.
@Xandinator a lock exploit coming from 1985 doesn't work anymore? Really? Wow, thats a surprise.
This doesn't work. Just google how to pick a master combo lock, that works way better. That works 70% of the time within 10 mins, 100% wihtin 20 mins. This never works.
i wonder what could be on the iphone though...
stealing an iphone from a ceo isn't hacking
Good tutorial welldone go on. . .
some body pls tell me where to get the unix os
intelligencelabs@gmail.com
The Hacker Spirit
The is a great article, people really trust those things and this kind of info could lead to a nice hack. Picture a CEO at a gym and has his iphone in a locker secured by a master lock! The old school hacker spirit!